Pressing guide
The settings and steps for your Press Peel Ship order.
290–300°F · 3 seconds · medium pressure · hot peel
These settings are for Press Peel Ship transfers. Test a transfer on a spare garment before starting a production run. Press calibration and fabric can affect the result.
Place the garment flat on your heat press and position the transfer with the printed side against the fabric. Keep seams and bulky areas out of the pressing area so pressure stays even.
Press at 290–300°F for 3 seconds with medium pressure. Open the press and peel the film while the transfer is hot.
Check that the design has adhered before continuing with the rest of the order. An optional second press can be used with a protective sheet. Follow the garment’s care requirements.
Pause the run. Check your press temperature, pressure, and whether seams are preventing even contact. Test again on a spare garment before pressing more pieces.
If the issue continues, contact us with your order number, fabric type, press settings, and photos. We can help you work through it.
Review the transfer and test your application first. We do not cover garment replacement costs. See the refund policy for production-error requests.
Tell us what you’re working on or what happened with your order.
